700nm Longpass Filter,LP700nm Long-wavelength pass Filter, Support customized

  • 700nm Longpass Filter

Product features

●Precise cutoff wavelength

● High Transmittance&deep cut-off depth

● Surface Quality:60/40 scratch-dig

● High Environmental Stability

● Multiple substrates available

●Wide range of applications

Product Detail

1.Product Descriptions:

Characteristics:700nm Longpass Filter
Type:Interference filter
Cut-off  Wavelength(CWL):700nm ±5nm
Average Transmittance(%) :>92%
Optical Density (OD):OD2-OD3
Shape:Round, Square or customized
Color:Silver
Surface Quality:60/40 scratch-dig
Dimension(mm):Customized*
Thickness(mm):Customized**
Substrate:Optical Glass ***
Remark: Spectral range:350-1100nm *Size customized:  86x86mm, 80x80mm, other can customized, max. 300x300mm **Thickness available: 0.21、0.3、0.55、0.7、1.0、1.1、1.5、1.8、2.0、3.0mm, etc. *** Available for: Ultra-clear glass,K9,BK7,B270,D2637T, Quartz Glass(Fused Silica) or other specified material.
2. Measured Spectral curve

Picture 1: LP700nm Spectral measurement Curve

3.What is typical application for 700nm longpass filter?

A 700nm longpass filter is an optical interference filter designed to transmit red and near-infrared radiation at wavelengths longer than 700nm, while effectively blocking or attenuating shorter-wavelength light below 700nm. 700nm longpass filters find wide application. In machine vision, they work with IR illumination to eliminate visible light interference and enhance defect contrast. In fluorescence microscopy and Raman spectroscopy, they block excitation light to boost signal-to-noise ratios. Similarly, in medical aesthetic devices and biometric systems, they select specific spectral components for optimal performance. Furthermore, they also support multi-band inspection, fiber optics, and stage lighting by removing stray light or modulating effects for precise spectral control.

4.What is key parameter when choose for right Longpass Filter?

When selecting a Longpass Filter, normally the following factors need to be taken into consideration:

  • Cut-Off Wavelength: it is one of the most important parameters, typically defined as the wavelength transmittance at 50% .
  • Average or Peak transmittance: usually average transmittance ≥90%, higher transmittance e.g. 92% or 95% on average or specific single point need to definite and communicate with manufacturer, higher transmittance need to additional AR coating.
  • Blocking rate: usually expressed in terms of optical density(OD), OD2-OD3 for standard and higher will be OD4-OD6 per requirement
  • Angle of Incidence (AOI): AOI need to be consider as Interference Filter is angle sensitive, 0° AOI  by default, other AOI e.g. 30/45° need to be specified.
  • Physical and environmental requirement: Substrate type, dimensions and thickness, surface quality, and environmental durability.

Shenzhen Hengda Liyuan Optoelectronics introduced advanced optical technology that apply depositing nano materials through ion-assisted evaporation onto a multilayer hard film in a high vacuum environment which coating layer is firm and has good tightness, and small bandwidth drift. Liyuan optoelectronics have been focus on optical coating for more than 17 years and offer one-stop optical filters solution including Narrow Bandpass Filters, IR cut-off Filters, Longpass & Short Filters, Notch Filters, ND filters, Star filters and Optical sapphire block.

other Longpass filters in stock from Liyuan Optoelectronics: LP430 LP500 LP560 LP600 LP650 LP800, etc.

Leave Your Message

Related Products

error: Content is protected !!
Scroll to Top