1.Product Descriptions:
| Characteristics: | 610nm Bandpass Filter |
| Type: | Interference type |
| Central Wavelength (CWL): | 610+-5nm |
| Full Width at Half Maximum(FWHM): | 25nm |
| Average Transmittance(%) : | >90% |
| Cut-off depth: | OD2-OD3 |
| Shape: | Square, Round, Irregular Shape |
| Color: | Orange-red |
| Surface Quality: | 60/40 scratch-dig or specified |
| Dimension(mm): | specified** |
| Thickness(mm): | specified*** |
| Substrate: | Ultra-clear glass,K9,BK7,B270,D2637T, Quartz Glass(Fused Silica) or other specified. |
| Remark: Spectral range:350-1100nm *Customized capability: 380-2500nm, stock for 10nm intervals. **Common for 86x86mm, 80x80mm, other can customized, max. 300x300mm *** Thickness available: 0.21、0.3、0.55、0.7、1.0、1.1、1.5、1.8、2.0、3.0mm, etc. | |
2.Measured Spectral Graph – 610nm Bandpass filter:
 |
| Picture 1: BP610-25nm Spectral Graph measurement |
3.What is typical application for 610nm bandpass filters?
A 610nm bandpass filter is an optical device designed to selectively transmit light centered around the 610nm wavelength while effectively blocking light at all other wavelengths. Typical applications for 610nm bandpass filters are very broad, including fluorescence microscopy and cellular imaging, flow cytometry, fluorescent in situ hybridization and cytogenetics, clinical diagnostics and automated assays, laser and optical sensing systems, industrial sorting and machine vision, among others.
4.What are key parameters when choose for a suitable Bandpass Filter?
When selecting a Narrow Bandpass Filter, normally the following factors need to be taken into consideration：
- Central Wavelength (CWL)：CWL is one of key parameter to designate first, it refer to the central wavelength at stable high transmission rate passband.
- Peak or Average Transmittance: typically ≥90%, Higher transmittance might need Anti-reflective(AR) coating.
- Full width at half maximum (FWHM): FWHM refer to the interval between the two wavelength points where the transmittance rate reaches 50%.
- Blocking rate: usually in terms of optical density(OD), OD2-OD3 for standard and higher will be OD4-OD6 per requirement.
- Angle of Incidence (AOI): AOI need to be considered as Interference Filter is angle sensitive, 0° AOI by default, other AOI e.g. 30/45° need to be specified.
- Physical and environmental requirement: Substrate type, dimensions and thickness, surface quality, and environmental durability.
Related products:
https://liyuan-optics.com/660nm-bandpass-filter-660nm-cwl10-30-40-70-75nm-fwhm-support-customized/ Shenzhen Hengda Liyuan Optoelectronics introduced advanced optical technology that apply depositing nanomaterials through ion-assisted evaporation onto a multilayer hard film in a high vacuum environment which coating layer is firm and has good tightness, and small bandwidth drift. Liyuan optoelectronics have been focus on optical coating for more than 17 years and offer one-stop optical filters solution including Narrow Bandpass Filters, IR cut-off Filters, Longpass & Short Filters, Notch Filters, ND filters, Star filters and Optical sapphire block. Other typical Bandpass filters in stock from Liyuan Optoelectronics include BP810 BP820 BP830 BP840 BP850 BP860 BP870 BP880 BP890 BP…etc.
